| Part type | Flex Bellows |
|---|---|
| Material | Ti Gr2 |
| Diameter | 70–127 mm OD |
| Wall thickness | 1 mm or 1.2 mm |
Questions about this part
What does the liner do?
What is the wave count?
Can it be welded to stainless?
How is it shipped?
Flex bellows
Titanium Exhaust Flex Bellows — Wave Type, 70–127 mm
Titanium Exhaust Flex Bellows — Wave Type, 70–127 mm
Why this one
Dimensions per variant, priced per variant
Fabrication buyers compare numbers, not adjectives. Each size carries its own price and its own row, so a quote does not need a follow-up email.
Titanium and how to weld it
The grade decides filler, purge and heat input. Getting that wrong is how a good part becomes a failed joint, so the weld notes are on the page.
Stock counts and real dimensions
We publish what is actually in stock and what each option measures, so a quote does not depend on an email reply.
In the box
The main item as shown. Clamps, gaskets and fitting hardware are not included unless this listing states otherwise.
Confirm your vehicle year, engine and connection dimensions before ordering.
Detail view
Close-up reference for the finish and connection area.
Specifications at a glance
The details that decide the fit.
| Product type | Flex bellows |
| Material | Titanium |
| Sizes available | 10 variants — see price table |
| Price | $52.13 – $89.65 |
| Stock | 1,800 units |
| Weld prep | Square cut, deburred |
| Option | Price |
|---|---|
| 70x1.0mm no liner 8wave | $52.13 |
| 76x1.0mm with liner 8wave | $71.63 |
| 76x1.0mm no liner 12wave | $58.63 |
| 76x1.2mm no liner 8wave | $58.50 |
| 80x1.0mm no liner 8wave | $53.03 |
| 89x1.0mm no liner 8wave | $54.70 |
| 89x1.0mm with liner 8wave | $74.20 |
| 102x1.0mm no liner 8wave | $70.15 |
| 102x1.0mm with liner 8wave | $89.65 |
| 127x1.0mm no liner 8wave | $80.44 |
From delivery to final check
Installation
Measure twice against your drawing or the old part.
Cut square and deburr before welding.
Purge and use the correct filler for the grade.
Check alignment after welding, not before.
Before you order
Questions worth answering first.
How do I weld titanium?
Titanium needs full argon purge inside and out with dedicated tooling. Inconel takes nickel filler and a slower puddle. 304 welds with 308L and no purge. The grade is in the spec table above.
Can I return cut material?
No. Uncut and in original packaging, yes. Cutting is irreversible, so confirm the size first.
How do I confirm fitment?
Send your vehicle year, engine and a photo of the mounting area. We will confirm the fitment boundary before you order.
Is professional installation recommended?
Yes. These parts are built for performance exhaust work and should be installed by a qualified technician.